Transistor, semiconductor device, and electronic device
摘要
說明書
Next, the configuration of each circuit is described. The antenna 804 exchanges the radio signal 803 with the antenna 802 that is connected to the communication device 801. The rectifier circuit 805 generates an input potential by rectification, for example, half-wave voltage doubler rectification of an input alternating signal generated by reception of a radio signal at the antenna 804 and smoothing of the rectified signal with a capacitor in a later stage in the rectifier circuit 805. Note that a limiter circuit may be provided on an input side or an output side of the rectifier circuit 805. The limiter circuit controls electric power so that electric power that is higher than or equal to certain electric power is not input to a circuit in a later stage if the amplitude of the input alternating signal is high and an internal generation voltage is high.
The constant voltage circuit 806 generates a stable power supply voltage from an input potential and supplies it to each circuit. Note that the constant voltage circuit 806 may include a reset signal generation circuit. The reset signal generation circuit is a circuit that generates a reset signal of the logic circuit 809 by utilizing rise of the stable power supply voltage.
The demodulation circuit 807 demodulates the input alternating signal by envelope detection and generates the demodulated signal. The modulation circuit 808 performs modulation in accordance with data to be output from the antenna 804.
