Active material, nonaqueous electrolyte battery, battery pack and battery module
摘要
說明書
The thermistor 25 detects the temperature of the unit cells 21 and the detection signal is sent to the protective circuit 26. The protective circuit 26 can shut down a plus-side wirer 34a and a minus-side wirer 34b between the protective circuit 26 and the energizing terminal 27 to an external device under a predetermined condition. The predetermined condition indicates, for example, the case where the temperature detected by the thermistor 25 becomes a predetermined temperature or more. Another example of the predetermined condition indicates the case where the over-charge, over-discharge, or over-current of the unit cells 21 is detected. The detection of the over-charge and the like is performed on each of the unit cells 21 or the whole of the battery module 23. When each of the unit cells 21 is detected, the cell voltage may be detected, or positive electrode or negative electrode potential may be detected. In the case of the latter, a lithium electrode to be used as a reference electrode is inserted into each of the unit cells 21. In the case of the battery pack 20 of
Protective sheets 36 including rubber or resin are arranged on three side planes of the battery module 23 except the side plane from which the positive electrode terminal 7 and the negative electrode terminal 6 are protruded.
