FIG. 7 shows the small retaining piece 50 that will lock the male assembly insert 60 in place. The retaining piece 50 has a circular opening 52 with three (3) notches 54 at the bottom of the retaining piece 50. The male assembly insert 60 is pushed through the small retaining piece 50 and the circular opening 52 locks the male assembly insert 60 in place. The small hole 52 with the three notches 34 allows the second ridge 65 to go through the circular opening 52 but locks the male assembly insert 60 into place because it cannot be removed from the retaining piece 50 due to the narrow circumference of the stem 63 between the first ridge 64 and the larger circumference of the top of the second ridge 65.

FIG. 8 shows all the pieces of the clipstand assembly 10. The bar 43 is inserted into the hinge 42 of the rear surface of the clip 45 and the hinge recess 24 of the collar 20 to form a completed unit. The adaptor 30 will be inserted into the collar 20 and held in place by the male assembly insert 60 being inserted into the collar 20 and the adaptor 30, and fixed into place with the small retaining piece 50.