High frequency signal transmission cable
地域：
Tokyo
摘要
A high frequency signal transmission cable includes a conductor, an insulator provided over a periphery of the conductor, a plating layer provided over a periphery of the insulator, and a sheath provided over a periphery of the plating layer. A crack suppressing layer is provided between the insulator and the plating layer, in such a manner as to remain in contact with the insulator while being provided with the plating layer over an outer surface of the crack suppressing layer. The crack suppressing layer suppresses the occurrence of a cracking in the plating layer by bending while moving in a longitudinal direction of the cable relative to a bending of the insulator.
說明書
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
The second braided shield 5b to be provided in the outer side of the metal shield layer 5 is mainly for intercepting an external noise. The high frequency signal transmission cable 1 is designed to be used in a factory or the like, for example, and is affected by a large energy noise such as a low frequency noise or the like due to on/off switching of a motor to drive the robot, the control device, or the like. For that reason, in the second braided shield 5b, it is desirable to use the metal wires 12 having a larger outer diameter than that of the metal wires 11 used in the first braided shield 5a, to thereby lower the conductor resistance of the second braided shield 5b.
意見反饋
使用該功能遇到問題