Large angle illuminated LED filament light bulb
摘要
說(shuō)明書
The only requirements on the organic solvent used for synthesizing the organosilicon-modified polyimide are to dissolve the organosilicon-modified polyimide and to ensure the affinity (wettability) to the phosphor or the fillers to be added. However, excessive residue of the solvent in the product should be avoided. Normally, the number of moles of the solvent is equal to that of water produced by the reaction between diamine and anhydride. For example, 1 mol diamine reacts with 1 mol anhydride to give 1 mol water; then the amount of solvent is 1 mol. In addition, the organic solvent used has a boiling point of above 80° C. and below 300° C., more preferably above 120° C. and below 250° C., under standard atmospheric pressure. Since drying and curing under a lower temperature are needed after coating, if the temperature is lower than 120° C., good coating cannot be achieved due to high drying speed during the coating process. If the boiling point of the organic solvent is higher than 250° C., the drying under a lower temperature may be deferred. Specifically, the organic solvent may be an ether-type organic solvent, an ester-type organic solvent, a dimethyl ether-type organic solvent, a ketone-type organic solvent, an alcohol-type organic solvent, an aromatic hydrocarbon solvent or other solvents. The ether-type organic solvent includes ethylene glycol monomethyl ether, ethylene glycol monoethyl ether, propylene glycol monomethyl ether, propylene glycol monoethyl ether, ethylene glycol dimethyl ether, ethylene glycol diethyl ether, ethylene glycol dibutyl ether, diethylene glycol dimethyl ether, diethylene glycol diethyl ether, diethylene glycol methyl ethyl ether, dipropylene glycol dimethyl ether or diethylene glycol dibutyl ether, and diethylene glycol butyl methyl ether. The ester-type organic solvent includes acetates, including ethylene glycol monoethyl ether acetate, diethylene glycol monobutyl ether acetate, propylene glycol monomethyl ether acetate, propyl acetate, propylene glycol diacetate, butyl acetate, isobutyl acetate, 3-methoxybutyl acetate, 3-methyl-3-methoxybutyl acetate, benzyl acetate and 2-(2-butoxyethoxy)ethyl acetate; and methyl lactate, ethyl lactate, n-butyl acetate, methyl benzoate and ethyl benzoate. The dimethyl ether-type solvent includes triethylene glycol dimethyl ether and tetraethylene glycol dimethyl ether. The ketone-type solvent includes acetylacetone, methyl propyl ketone, methyl butyl ketone, methyl isobutyl ketone, cyclopentanone, and 2-heptanone. The alcohol-type solvent includes butanol, isobutanol, isopentanol, 4-methyl-2-pentanol, 3-methyl-2-butanol, 3-methyl-3-methoxybutanol, and diacetone alcohol. The aromatic hydrocarbon solvent includes toluene and xylene. Other solvents include γ-butyrolactone, N-methylpyrrolidone, N, N-dimethylformamide, N,N-dimethylacetamide and dimethyl sulfoxide.
