The bottom 38 of the cooling pad 34 may have anti-slip properties including, but not limited to, feet or a textured material that may be applied to the bottom 38 to create an anti-slip feature. Feet can be a small type of knob of any style, shape, or material that slightly elevates the bottom 38 of the cooling pad 34 above a surface so there is no direct between the cooling pad 34 and the surface. Any number of feet may be included on the bottom 38, for example, four feet where one foot is arranged on each corner of the bottom 38. The feet can be any size ranging between about 1/100 of an inch and twelve inches. Additionally, the cooling pad 34 may include stand extensions to elevate the cooling pad 34 in the same manner as a television or bed tray.

FIG. 8 is a diagram illustrating the sectional view of the cooling pad 34 as shown in FIG. 7, further including a cold gel pack 68 positioned within the housing 64. The gel pack 68 should fit within the housing 64 and be large enough to cool the electronic computing device 32 as described herein. For example, the length and width of the gel pack should be in a range between about 1/100 of an inch and thirty-six inches. The height of the gel pack 68 should be in a range between about 1/100 of an inch and twelve inches.