b. Installer physically mounts Wifi cameras in their location and plugs into AC power. Optional fishing of low voltage wire through wall to remove dangling wires. Camera transformer is still plugged into outlet but wire is now inside the wall.
c. Installer puts SimonXT into Test mode from the keypad.
d. Installer manually tests the operation of each sensor, receiving an audible confirmation from SimonXT.
e. Installer exits test mode from the Simon XT keypad.
f. Installer returns to web interface and is prompted to automatically set up cameras. After waiting for completion cameras are now provisioned and operational.
5. Installer instructs customer on use of the Simon XT, and shows customer how to log into the integrated security system web and mobile portals. Customer creates a username/password at this time.
6. Customer and Installer observe that all sensors/cameras are green.
7. Installer instructs customer how to change Simon XT user code from the keypad. Customer changes user code and stores in SimonXT.
8. The first time the customer uses the web portal to Arm/Disarm system the web interface prompts the customer for the user code, which is then stored securely on the server. In the event the user code is changed on the panel the web interface once again prompts the customer.