Ground lug holder 200 includes handle 204 and handle 206 that are moveable (e.g., rotate and move in and out with respect to body 202). Handle 204 is attached to fastener extension 208, and fastener extension 208 can be manipulated using handle 204. Fastener extension 208 has been inserted through a first opening/hole of ground lug 102 and a first opening/hole (e.g., opening 404 shown in FIG. 4) of panel portion 402 to secure ground lug 102 to panel portion 402 of the object to be grounded. Once inserted in the first opening/hole of panel portion 402, the T-shaped end of fastener extension 208 has to be rotated using handle 204 to be at an orientation (e.g., 90 degree quarter-turn) that allows the side extensions of the T-shaped end to catch and maintain contact with a rear side of panel portion 402 around the first opening to prevent the T-shaped end from exiting the first opening of panel portion 402, thereby securing ground lug holder 200 to panel portion 402 with ground lug 102 sandwiched in between. Spring 216 applies a force between handle 204 and body 202 that pushes out handle 204 to apply a retracting force on fastener extension 208. Thus spring 216 applies the force needed to allow the T-shaped end of extension 208 to maintain contact with the rear side of panel portion 402 around its first opening.