The fifth generation wireless communication system, supports standalone mode of operation as well dual connectivity (DC). In DC a multiple Rx/Tx UE may be configured to utilize resources provided by two different nodes (or NBs) connected via non-ideal backhaul. One node acts as the Master Node (MN) and the other as the Secondary Node (SN). The MN and SN are connected via a network interface and at least the MN is connected to the core network. NR also supports Multi-RAT Dual Connectivity (MR-DC) operation whereby a UE in radio resource control connected (RRC_CONNECTED) is configured to utilize radio resources provided by two distinct schedulers, located in two different nodes connected via a non-ideal backhaul and providing either Evolved Universal Mobile Telecommunications System (UMTS) Terrestrial Radio Access (E-UTRA) (i.e. if the node is an ng-eNB) or NR access (i.e. if the node is a gNB). In NR for a UE in RRC_CONNECTED not configured with CA/DC there is only one serving cell comprising of the primary cell. For a UE in RRC_CONNECTED configured with CA/DC the term ‘serving cells’ is used to denote the set of cells comprising of the Special Cell(s) and all secondary cells. In NR the term Master Cell Group (MCG) refers to a group of serving cells associated with the Master Node, comprising of the primary cell (PCell) and optionally one or more secondary cells (SCells). In NR the term Secondary Cell Group (SCG) refers to a group of serving cells associated with the Secondary Node, comprising of the primary SCG cell (PSCell) and optionally one or more SCells. In NR PCell refers to a serving cell in MCG, operating on the primary frequency, in which the UE either performs the initial connection establishment procedure or initiates the connection re-establishment procedure. In NR for a UE configured with CA, SCell is a cell providing additional radio resources on top of Special Cell. Primary SCG Cell refers to a serving cell in SCG in which the UE performs random access when performing the Reconfiguration with Sync procedure. For Dual Connectivity operation the term SpCell (i.e. Special Cell) refers to the PCell of the MCG or the PSCell of the SCG, otherwise the term Special Cell refers to the PCell.