The at least one BWP includes at least one activated BWP and/or at least one configured BWP, and the at least one cell includes at least one serving cell and/or at least one configured cell.

Specifically, the one set of reference state configuration parameters includes at least one of the following parameters:

a preset counter specific to the reference state or a timing length of a timer specific to the reference state.

When the reference state includes the RLM, the preset counter includes an out-of-sync counter and an in-sync counter. When the reference state includes the BFD, the preset counter includes a beam failure instance counter.

It should be noted that all descriptions of the network device in the foregoing embodiment are applicable to the embodiments of the detection configuration method, for network communication, applied to the network device, and a technical effect that is the same as that in the foregoing embodiment can also be achieved.

As shown in FIG. 3, some embodiments of this disclosure provide a terminal 300, including:

an obtaining module 301, configured to obtain a monitoring configuration parameter of a reference state, where the monitoring configuration parameter includes at least one set of reference state configuration parameters; and

a measurement module 302, configured to perform, based on the monitoring configuration parameter, a detection process corresponding to the reference state.

The reference state includes radio link monitor RLM and/or beam failure detection BFD.

Specifically, the monitoring configuration parameter includes at least one of the following information: